Hello! Welcome to the official website of Hangzhou Yutong Machinery Co., Ltd!   XML
More than 10 years
Focus on mechanical equipment experience
Your current location: HOME > NEWS > common problem

common problem

Do you know the production process of steel buckle wooden box?

Update time  2021-01-08 17:38 read:

  The production of steel belt wooden boxes requires the purchase of a set of equipment specializing in the production of steel belt wooden boxes. Wooden box production equipment manufacturers mainly have two methods: one is a combination of steel belt and male buckle, the production method is that the bottom and the upper cover are surrounded by Steel belt, the left and right plates are the male buckle part, the front and rear plates are the male buckle up and down, the vertical side is the steel belt; one is a combination of male and female buckles, and the difference from the steel-sided wooden box is the steel belt-side wooden box. The main purpose of using female buckles is to facilitate disassembly. The use of steel side boxes can make the product image larger, and the company’s image can be greatly improved, the safety performance is more stable, the phenomenon of missing nails and fewer nails is reduced, and logistics costs are also reduced. .


  According to the size provided by the customer, use a precision sliding table saw to cut the wooden box bottom plate, cover plate, front and rear plates, and left and right plates of the required size. According to customer requirements, the edge of the plywood can also be cut to an angle of 45 degrees, so that the two pieces of plywood can be connected more closely.

The production of steel side boxes: first use a steel belt machine to punch out the bottom cover steel belt and height column of the steel belt wooden box according to the size, and then press the steel belt on the bottom plate and the cover plate with a punch, and press the bottom steel belt after pressing The customer requires nailing the bottom square strip; then the upper and lower parts of the left and right plates and the long sides of the front and rear plates need to be buckled with a buckle machine according to the data size of the bottom cover steel strip; then the height of the front and rear plates is to be used for the column steel strip; then follow the order The connection is completed.

After reading this article, have you solved the problem? Have you learned anything? If you think this article is well written, please pay attention to our website. We will update some new knowledge on the website regularly for Everybody browses and reads. Thank you for reading this article.